To Next PageTo Next PageWhy won't my Toro Z286E engine start, starts hard, or fails to keep running?
If your Toro Lawn Mower engine will not start, starts hard, or fails to keep running, try the following: * Fill the fuel tank with gasoline. * Clean or replace the air cleaner element. * Install the wires on the spark plug. * Install new, correctly gapped spark plugs. * Replace the fuel filter.
Why does my Toro Z286E engine lose power?
If your Toro Lawn Mower engine loses power: * Reduce ground speed. * Clean the air cleaner element. * Add oil to the crankcase. * Remove any obstruction from the cooling fins and air passages. * Install new, correctly gapped spark plugs. * Open the vent in the fuel cap. * Replace the fuel filter.
General| Brand | Toro |
|---|---|
| Model | Z286E |
| Category | Lawn Mower |
| Language | English |
General safety overview and hazard signal words.
Guidelines for safe operation based on ANSI standard.
Steps to prepare the machine and area before operation.
Instructions for safe operation of the machine.
Procedures for maintenance and storing the machine.
Specific safety information for Toro products.
Basic instructions for operating the mower safely.
Precautions and techniques for operating on slopes.
General service and maintenance guidelines.
Visual guide to determine safe slope angles for operation.
Location and importance of safety and instruction decals.
Type of gasoline recommended for use in the mower.
Benefits and usage of fuel stabilizer/conditioner.
Procedures for safely filling the fuel tank.
How to check the engine oil level.
List of parts included with the machine and their purpose.
Steps for installing the drive wheels.
Recommended tire pressure for optimal performance.
Instructions for installing the motion control levers.
Steps for installing the operator's seat.
Procedure for activating a new battery.
Steps to install the air cleaner assembly.
How to check the hydraulic fluid level.
Instructions for greasing cutting unit spindle bearings.
Emphasizes the importance of safety during operation.
Overview and identification of all machine controls.
Procedure for checking the side discharge chute.
How to check the mower deck level.
How to check the engine oil level.
How the hour meter records engine operation time.
Understanding the malfunction indicator light (MIL).
Procedure for switching between the two fuel tanks.
Instructions for setting and releasing the parking brake.
Step-by-step guide to starting and stopping the engine.
How to engage and disengage the PTO.
Explanation of how the safety interlock system functions.
Procedure for testing the safety interlock system.
Instructions for driving the machine forward and backward.
Procedures for safely stopping the machine.
How to adjust the mower deck height.
How to use the lift assist lever for deck adjustment.
How to adjust anti-scalp rollers for deck flotation.
Instructions for adjusting seat position and suspension.
Procedure for manually moving the machine.
Information about available Rollover Protection Systems (ROPS).
How to use the side discharge deflector.
Precautions and procedures for loading the machine.
Steps to safely drive the machine onto the Z Stand.
Steps to safely drive the machine off the Z Stand.
Importance of using fast throttle for mowing.
Advice for initial lawn cutting.
Recommended grass cutting amount.
Alternating mowing direction for best results.
Guidance on mowing frequency.
Using appropriate speed for cut quality.
Caution against cutting grass too short.
Techniques for mowing long grass.
Advice on stopping the machine while mowing.
Importance of cleaning the mower deck underside.
How to maintain sharp and undamaged cutting blades.
Schedule of maintenance tasks based on operating hours.
Procedures for inspecting, sharpening, and replacing cutting blades.
Steps to safely remove mower blades.
Steps to safely install mower blades.
Procedures for servicing the air cleaner and filter.
How to read and use the air cleaner filter minder gauge.
Steps to remove the air cleaner assembly.
How to clean the primary air filter element.
Steps for installing air filters and cover.
Procedures for changing engine oil and filter.
How to check the engine oil level.
Step-by-step guide to changing engine oil.
Procedures for replacing the engine oil filter.
How to service and replace spark plugs.
How to inspect spark plugs for proper operation.
Understanding the malfunction indicator light (MIL).
Procedures for servicing fuel filters.
How to replace the high pressure fuel filter.
Procedures for servicing the fuel tank, including draining.
How to clean engine cooling fins.
How to inspect and service the spark arrester.
How to clean engine screen and oil cooler.
General lubrication points and procedures.
Procedure for lubricating front caster pivots.
Identifying grease fitting locations.
Identifying lubrication points for oil/spray.
How to check and adjust tire pressure.
How to adjust the wheel hub slotted nut.
How to adjust the caster pivot bearing.
How to check the hydraulic fluid level.
Steps to replace the hydraulic filter.
Procedure to bleed air from the hydraulic system.
How to inspect hydraulic lines for leaks and wear.
How to adjust motion control levers for proper alignment.
How to adjust the hydraulic pump to neutral.
How to replace the pump drive belt.
How to adjust the parking brake.
How to check and replace fuses.
Procedures for servicing the battery.
How to check the battery's electrolyte level.
Steps for installing the battery.
Steps to safely remove the battery.
How to add distilled water to the battery.
Procedure for charging the battery.
How to adjust the mower deck level for optimal cutting.
How to adjust the deck lift compression springs.
How to clean grass buildup from under the mower deck.
How to inspect belts for wear and damage.
How to replace the mower deck belt.
How to replace the PTO drive belt.
How to replace the grass deflector.
Information about the mercury tilt switch.
Guidelines for proper disposal of mercury tilt switches.
Guidelines for disposing of engine oil and coolant.
Schematic showing electrical connections and components.
Procedures for cleaning and preparing the machine for storage.
Possible causes and solutions for starter issues.
Troubleshooting engine starting and running problems.
Possible causes and solutions for loss of engine power.
Possible causes and solutions for engine overheating.
Troubleshooting steps for when the machine does not drive.
Possible causes and solutions for abnormal machine vibration.
Troubleshooting steps for uneven cutting height.
Troubleshooting steps for when mower blades do not rotate.
Troubleshooting for the Malfunction Indicator Light (MIL).
Details of products and conditions covered by the warranty.
Owner's duties for maintaining the product under warranty.
Exclusions from the warranty coverage.
General terms and conditions of the warranty.
How to obtain warranty service for the product.
Information for customers outside the US and Canada.
