Why is my Toro Lawn Mower engine overheating?
Your Toro Lawn Mower engine might be overheating due to several reasons. The engine load could be excessive, so reduce your ground speed. Check the oil level in the crankcase and add oil if it's low. Also, ensure that the cooling fins and air passages under the engine blower housing are free from obstructions; if plugged, remove the obstruction.
How to stop abnormal vibration in my Toro Z355 Z-Master Lawn Mower?
Abnormal vibration in your Toro Lawn Mower can stem from several issues: * Loose engine mounting bolts: Tighten the engine mounting bolts. * Loose engine pulley, idler pulley, or blade pulley: Tighten the appropriate pulley. * Loose deck gearbox bolts: Check and tighten the bolts. * Bent blades: Replace the blades.
General| Transmission | Hydrostatic |
|---|---|
| Spindle Material | Cast Iron |
| Model | Z355 Z-Master |
| Cutting Width | 132 cm |
| Fuel Capacity | 30.3 L |
| Blade Tip Speed | 18, 500 fpm |
| Deck Material | Steel |
| Warranty | 3 years |
Guidelines for safe operation on slopes and ramps.
Crucial safety information for operating the machine.
Schedule for routine maintenance tasks based on operating hours.
Steps for changing the engine oil.
To Next Page