Toro Z557 Z Master - Using the Lift Assist Lever; Positioning the Seat

Figure 22
Position B
Use this position when bag ging .
Figure 23
Position C
T his is the full open position. T he sug g ested use
for this position is as follo ws .
• Use in tall, dense g rass mo wing conditions .
• Use in w et conditions .
• Lo w ers the engine po w er consumption.
• Allo ws increased g round speed in hea vy
conditions .
• T his position is similar to the benefits of the
T oro SFS mo w er .
Figure 24
Using the Lift Assist Lever
T he lift assist lev er is used along with the
height-of-cut lev er for raising the mo w er . T his
allo ws for easier raising of the mo w er .
1. Place y our foot onto lift assist lev er .
2. Press on the lift assist lev er while pulling up on
the height-of-cut lev er ( Figure 25 ).
Figure 25
1. Lift Assist Lever
Positioning the Seat
T he seat can mo v e forw ard and bac kw ard.
P osition the seat where y ou ha v e the best control
of the mac hine and are most comfor table .
Important: T o adjust, mo v e the lev er
sidew ays to unlock seat ( Figur e 26 ).
Slide the seat to the desired position and release
lev er to loc k in position.
25