Torso Electronics T-1 - System Configuration

A number of under the hood settings that
control global or system specic functions exist
in T-1. These settings allow selection of options
for user experience, general settings and
connectivity congurations. As with all
connected applications, It is important when
conguring the input and output connectivity
settings to apply these correctly to match the
destination device. Often once set many of
these parameter settings can be left alone. The
out of the box congurations are generally ok
for many applications, especially as a starting
point. Alternate settings are also possible when
the need arises. Torso Electronics have
developed a free conguration tool and utility
for accessing and editing T-1’s settings. The
‘T-1 Cong’ tool can be downloaded from the
Torso Electronics website, located in the
resources section of the site. T-1 Cong
versions are available which are compatible
with Intel and M1 Mac’s and Windows PC’s.
The PC/Mac hosting T-1 Cong is then
connected to the T-1 sequencer using the USB
connection and cable. This book shows
illustrations and instructions based on a
Macbook view but these will be similar for PC
based applications. T-1 Cong is essential when
setting up the MIDI and Analog input and output
settings. The specic details of which will be
covered in the respective sections. Guidance on
rmware updates is also covered in this section.
This chapter therefore gives an overview of the
cong pages and parameters. In depth
application, use of connectivity options and
synchronisation is explained in the relevant
sections. This section therefore concludes the
coverage of T-1 sequencer.
System Conguration
203
The T-1 Notebook : Reference & Guide
202
The T-1 Notebook : Reference & Guide
NOTES
10