75
The T-1 Notebook : Reference & Guide
74
The T-1 Notebook : Reference & Guide
NOTESNOTES
Rhythmic Patterns
3
Rhythmic Patterns
3
▌ DUPLICATING A PARAMETER BETWEEN TRACKS
1. Hold [CTRL] + [COPY] + [PATTERN] + (Knob), where ‘Knob’ is the
current track parameter control to copy represented by the rotary knobs.
2. The source track value button will slowly ash GREEN ⬛.
3. While Still holding [CTRL] + [COPY] + [PATTERN], press [VBx], where
‘x’ is the destination track to paste the copied parameter into.
4. The destination track value button will quickly ash GREEN ⬛. The
destination parameter will be overwritten with the copied parameter.
It is a good habit to copy the working bank to another bank as different
iterations of your project develop. This way its easy to revert to an earlier
version of the project if things get lost in the process.
3.14 Saving Patterns and Tracks with Banks
T-1 has an auto-save function and will restore the previous bank on start
up. Patterns and Tracks, including the Parameters can also be manually
saved with the bank. There is no manual save for individual patterns or
tracks, but this is done within the process for saving the bank.
It is a good habit to regularly save the working bank as patterns are being
developed.
▌ SAVING A BANK
1. Edited, unsaved banks will illuminate PINK ⬛ when holding [BANK] and
in addition, will also ash if a pattern is playing.
2. To save a bank. Hold [CTRL] + [SAVE] + [VBx], ‘x’ is the value button of
the bank to save.
3. The bank button and it’s associated value button will ash PINK ⬛
indicating the bank is saved and then will turn white.
4. Release the buttons once save is complete.
▌ RELOADING FROM A SAVED BANK
1. Hold for 1 second, [BANK] + [VBx], where ‘x’ is the edited bank to
reload and is represented by value buttons 1-16.
2. The value button will ash green.
3. The previously saved bank in the slot is reloaded.
4. All banks are reloaded if the T-1 is powered up while holding [BANK].
To Next Page
Loading...
