toscano vigilec zero V1Z - Getting Started Guide; Display Messages During Operation

ENGLISH ( EN )
15
2. GETTING STARTED
Underload Setting (Imin)
Overload Setting (Imax)
Restart time (restart)
Inhibition time ( ow switch)
Running hours
Number of starts
Software version
The following messages will be shown on the display when the side selector changes
from the 0 position to the AUTO position as long as the equipment is correctly powered.
The message “Inhibition time” , |
1nh 15 |will only be displayed when the  ow switch
option is activated (see page 19).
ii
Distribuido por Adajusa