toscano vigilec zero V1Z - Phase Loss Protection

ENGLISH ( EN )
22
X
X
OK
...4 ... | PxA ERR |
ERROR
X
X
ERROR
X
X
ii
Phase loss (three-phase pumps)
In a three-phase installation, when one of the phases is interrupted or missing, in the
supply of the equipment or in the output to the pump, a failure due to lack or loss of
phase occurs.
The device detects the problem and displays the fault |
PxA ERR | .
Setting the underload protection (Imin.) to the “OFF” position cancels the phase
failure protection.
Distribuido por Adajusa