15
4. System Disassembly
Disassembly Tools
The following tools are required for disassembling the system.
• Wrist-grounding strap and conductive mat for preventing electrostatic discharge
• Philips screwdriver
• Hex screwdriver
Disassembly Reminders
• Electrostatic Discharge (ESD) precautions should be observed to prevent damaging the
internal components.
• Follow the sequence indicated in the illustrative figures when removing the screws
securing the components.
• The screws for the different components vary in size. During the disassembly process,
group the screws with their corresponding components to avoid mismatches when
putting back the components.
• After removing the adhesive tapes, paste them back near their original location for use
during system reassembly.
• Prior to disassembly, place the LCD TV on a stable, level surface protected by a cushion.
To Next Page
Loading...
Need help?
General
