Toshiba 1800 SERIES - UPS Fault Conditions (Continued); Output Over Voltage and System Overheat Faults

1800 Series User Manual
34
Faults (cont.)
Description and Resolution This fault indicates an internal problem with the UPS. Con- tact your Toshiba UPS service representative at 1-877-867- 8773 (outside the U.S. call 713-466-0277). If the system Overheat Fault is triggered under normal mode, the unit will transfer to bypass. The unit will shut down after a certain amount of time in bypass. This fault indicates an internal problem with the UPS. Contact your Toshiba UPS service representa- tive at 1-877-867-8773 (outside the U.S. call 713-466-0277).
= Flashing LED = LED lit continuously
Alarm State Alarm will sound for 1/2-second at 1/2-second intervals.
LED State Warning/Fault On 100% On Warning/Fault On 150% On
Display StateFault
Output Over Voltage System Over Heat