TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV's
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, setthe TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
Press MENU.
Press SET
+
or - until the indicator next to
"CH SET" begins to flash, then press
ENTER.
Press SET + or - until the indicator next
to "TV/CABLE" begins to flash.
Press ENTER to select the TV or CABLE
mode. The arrow indicates the selected
mode.
,M1NU
-ICHSET
/~PICTURE
• AUDIO
• LANGUAGE
I
V-CHIP
SET
I LOCK
«
I-I ENTER! MENU)
,
,
- • TV II> CABLE
,
,
I AUTO CH MEMORY
I ADD
I
DELETE
(+
I-I ENTER
I
MENU)
[§]
Press MENU repeatedly until the
MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
AUTOMATIC CHANNEL MEMORY
OJ
Press MENU.
[g]
Press SET + or - until the indicator next to
"CH SET" begins to flash, then press
ENTER.
Press SET + or - until the indicator next
to "AUTO CH MEMORY" begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
ADJUSTING PICTURE
,MpNU
-ICHSET
".'PICTURE
• AUDIO
• LANGUAGE
• V-CHIP SET
• LOCK
(+I-f
ENTER (MENU)
[±]
Press MENU repeatedly until the MENU screen is
cleared.
TO ADD/DELETE CHANNELS
OJ
Press MENU.
[g]
I TV'" CABLE
,,
- • AUTO CH MEMORY
,,
• ADD
I
DELETE
(+
I-I ENTER
I
MENU)
,MpNU
-ICHSET
""PICTURE
• AUDIO
• LANGUAGE
• V-CHIP SET
• LOCK
{t
I-I
ENTER I MENU>
Press SET + or - until the indicator '-....;-------'
next to "ADD/DELETE" begins to
flash, then press ENTER .
Press SET
+
or - until the indicator next to
"CH SET" begins to flash, then press
ENTER.
• TV ••. CABLE
• AUTO CH MEMORY
,,
- • ADD
I
DELETE
,
,
(+
I-tENTER I MENU)
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0-9), CH +
or - or SET + or-.
[§]
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. Press ENTER if you wish to
DELETE the channel from memory.
The channel indicator will change from ADD CH012
green to red when a channel is de-
leted. Repeat Steps 4 and 5 for each
channel to be added or deleted.
(O-9I.'-IENTERIMENU)
[§]
Press MENU repeatedly until the MENU screen is
cleared.
[±]
Press SET + or - button to adjust the setting.
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
Press MENU.
Press SET + or - until the indicator next to "PICTURE"
begins to flash, then press ENTER.
Press ENTER repeatedly to select the item you want to
adjust.
+
-
BRIGHTNESS increase brightness decrease brightness
CONTRAST increase contrast
decrease contrast
COLOR brilliant color pale color
TINT
greenish color reddish color
SHARPNESS makes picture clearer
makes picture softer
TO RETURN TO INITIAL SETTING
BRIGHTNESS ~ CONTRAST ~ COLOR ~ TINT ~ SHARPNESS Press RESET while the picture adjusting mode appears
t
lon-screen.
9
To Next Page
Loading...
Need help?
General
