Need help?Do you have a question about the Toshiba 20AF42 and is the answer not in the manual?
Warning about high voltage parts and avoiding electric shock.
Emphasizes using specific, safety-rated parts for replacements.
Advises on maintaining high voltage peripheral circuits to prevent X-ray emission.
Guidance on post-service safety checks, including insulation testing.
Step-by-step guide for safely removing the anode cap, including discharge procedures.
Detailed procedure for removing and installing flat package ICs using desoldering machines.
Guide for replacing the EEPROM IC, including data setting procedures.
Precautions and necessary tools before performing electrical adjustments.
Procedure to adjust the constant voltage to 116 ± 1V.
Steps for adjusting RF AGC to 2.2 ± 0.05V.
Procedure for adjusting the cutoff point to obtain a dim raster.
Adjusting white balance settings for R.BIAS, G.BIAS, B.BIAS, etc.
Adjusting horizontal position to minimize overscan on the screen.
Adjusting vertical position to fit the horizontal line to the shadow mask notch.
To Next Page
General
