6
LOCATION OF CONTROLS
FRONT BACK
1. POWER indicator - Lights up when the power is
turned on.
2. Remote Sensor - Signals from the Remote Control
unit are received here.
3. POWER Button - Press to turn the TV on or off.
4. VOLUME ▲/▼ Buttons - Press to raise or lower the
level of the sound.
(MENU Buttons) - Press both VOLUME ▲/▼ buttons
at the same time to display the on-screen menu functions.
(SET + / – Buttons) - Press to select the desired set-
ting during on-screen operations.
5. CHANNEL ▲/▼ Buttons - Press to select a higher or
lower numbered channel set into memory.
(ENTER Button) - Press to enter or select information
for on-screen operations.
(RESET Button) - Press, while in the on-screen
menu mode, to reset the on-screen picture adjust-
ments to their factory preset positions.
6. AUDIO/VIDEO IN Jacks - Audio and video signal
cables from an external source can be connected
here.
7. AC Power Cord - Plug into an outlet with 120V,
60 Hz AC power only.
8. VHF/UHF IN (ANT.) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
VIDEO
CHANNEL
RESETENTER
SET
MENU
AUDIO
VOLUMEPOWER
VIDEO
CHANNEL
RESETENTER
SET
MENU
AUDIO
VOLUME
POWER
613 5
4
2
ANT.
8
7
3M21701A-E P02-08 5/2/04, 10:236
To Next Page
Loading...
