23
Connecting a computer
An analog RGB (15 pin) computer cable can be connected.
TV back view
TV back view
Mini D-sub 15 pin
Computer
RGB PC cable
Conversion adapter
(if necessary)
Audio jack
(Ø3.5 mm)
Connect a PC cable from the computer to the a RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640 x 480 @ 60 Hz
• SVGA: VESA 800 x 600 @ 60 Hz
• XGA: VESA 1024 x 768 @ 60 Hz
However, these signal formats are converted to match the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
For the best PC viewing, set PC source to SVGA @ 60 Hz format. Other signal formats may not be
displayed correctly.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin
terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the malfunction.
• If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting
menu.
• Depending on the specifi cation of the PC you are playing the DVD-Video on, and the DVD’s title,
some scenes may be skipped, or you may not be able to pause during multi-angle scenes.
Connecting your TV
To Next Page
Loading...
Need help?
General
