Infrared Transmitter Window
INPUT
Press Switch to external video input
mode.
Press again Switch to TV mode.
Press Switch to external video
INPUT 1 mode.
Press 2 times Switch to external
video INPUT 2 mode.
Press 3 times Switch back to the
original TV mode.
CHANNEL UP/DOWN
( )
Selects next higher channel.
( ) Selects next lower channel.
• Moves the “
” mark of the MENU
screen.
MENU
Press Accesses
MAIN MENU.
Press
again Exits MAIN MENU.
DISPL
AY
Press Displays
receiving channel for
4
seconds.
Press
again Removes display.
•
Temporarily displays receiving
channel
when in Closed Caption
mode.
Basic Remote Control Functions
POWER
Press On.
Press
again Off.
REMOTE
KEYPAD
Accesses
any channel from keypad.
RE
TURN
Returns
to previous channel.
VOLUME
UP/DOWN
(+)
Increases sound.
(–)
Decreases sound.
• In
menu mode, changes or selects
the
TV adjustments.
MUTE
Press Mutes sound.
Press
again Restores sound.
• CLOSED
CAPTION appears when
sound
is muted.
RETURN
Front Panel
Press → On.
Press again
→ Off.
SENSOR AREA FOR
REMOTE CONTROL
ON TIMER indicator.
CHANNEL UP/DOWN
(=) Selects next higher channel.
(>) Selects next lower channel.
MENU
Press
→ Accesses MAIN MENU.
Press again
→ Exits MAIN MENU.
VOLUME UP/DOWN
(=) Increases sound.
(>) Decreases sound.
LOCATION OF USER'S CONTROL
——
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic mater ial, so it is safe to use.
• The degree of illumination will var y depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
21ARF46
POWER
To Next Page
Loading...
