EasyManua.ls Logo

Toshiba 32PS10E - Using the TVs features; Selecting the bilingual programmes; Selecting the monaural programmes; Adjusting the sound quality

Toshiba 32PS10E
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Using the TV’s features
Using the Advanced Sound Settings
Bass Boosthelpstocreaterichbass.
Voice Enhancementhelpstoemphasize
dialogue.Itwillbeeasiertohearvoicesover
otherbackgroundaudio.
1 FromtheSOUNDmenu,presssorrto
selectAdvanced Sound Settings,andthen
pressQ.
2 Presssorrtoselecttheitemyouwantto
adjust.
Advanced Sound Settings
Bass Boost
Voice Enhancement
On
Off
Voice Enhancement : Toturnthevocal
emphasiseffectOn
orOff.
Bass Boost:
Toselectthedesired
bassexpansionlevel
OnorOff.
Using the Stable Sound
TheStable Soundfunctionlimitsthehighest
volumeleveltopreventextremechangesin
volumewhenthesignalsourcechanges(for
example,topreventthesuddenincrease
involumethatoftenhappenswhenaTV
programmeswitchestoacommercial).
1 FromtheSOUNDmenu,presssorrto
selectStable Sound.
2 PressvorwtoselectOnorOff.
Note:
TheStable Soundeffectisactiveonlywhenthe
sound outputs from the speaker.
Dynamic Range Control
Thisfeatureallowscontrolofcompressionfor
digitalaudiosignalexcludingthosewithMPEG-1
andMPEG-2audio.
1 FromtheSOUNDmenu,presssorrto
selectDynamic Range Control.
2 PressvorwtoselectOnorOff.
Setting the Digital Audio Output
1 FromtheSETUPmenu,presssorrto
selectAV Connection,andthenpressQ.
2 PresssorrtoselectDigital Audio
Output.
Stereo
Selecting the bilingual programmes
1 Whenabilingualprogrammeisreceived,
jDualappears.
2 Pressgtoselectthesoundtobe
heard.Thesounddiffersaccordingtothe
transmissionsystem:NICAMorGerman
stereo/bilingualbroadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
jDual1
SubIsound
Mainsound
JDual2
SubIIsound
Subsound
e Mono
Mainsound
Note:
ThesesettingsarenotstoredintheTVmemory.
Selecting the monaural programmes
Ifsounddistortion,interruptionsorsilence
arisesinthelowsoundvolumelevel,settingthe
eMono 2modewillmitigatetheproblem.
1 Whenamonauralprogrammeisreceived,e
Monoappears.
2 Pressgtoselectamonauralmodethat
iseasytohear.eMono 1andeMono 2
appearcyclicallytothescreen.
Note:
Onsomecases,thereceptionofstereo/bilingual
broadcastsmaynotbepossibleafterswitching
on the e Mono 2 mode.
Adjusting the sound quality
1 FromtheSOUNDmenu,presssorrto
selectanitemyouwanttoadjust.
2 Pressvorwtoadjustthesettingsas
required.
Selection
v
Pressing
w
Bass weaker stronger
Treble weaker stronger
Balance decreasesthe
rightchannel
decreasesthe
leftchannel

Related product manuals