Toshiba 40HL933B - Page 25

25
English
Q
(
4*'%)
A
Connect the source via a SCART cable
and play. Select Manual setting from
the SETUP menu and set the Colour
System to Auto.
Manual setting
EXT 1
Colour system: Auto
A
Back
RETURN
Select Change Save
OK
Q
(
)
A
Use the universal password 1276, then
change to a new number of your choice.
Q
(.
!")
A
Make sure to use cables with the HDMI
logo (
®
). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
(2%502$
)
A
Check the correct input has been cho-
sen: S-VIDEO or AV.
Q
(*2)
A
After roughly 15 minutes without any
input video signal at TV mode, the TV
will turn off to save power.