Toshiba 40L3451DN User Manual

English - 29 -
English
Settings Menu Operation, Conditional Access
Conguring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Viewing Settings Menu
Press MENU button and select Settings by using Left
or Right button. Press OK button to view Settings
menu.
Operating Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Press OK button to select an item.
• Press MENU button to exit.
Conditional Access
This setting controls conditional access modules
when available. Use Up or Down button to highlight
Conditional Access. Press OK button to continue.
Language
Congures language settings. See page 22.
Parental
Congures parental settings. See page 23.
Timers
Sets timers for selected programmes. See page 30.
Date/Time
You can congure date/time preferences by using this
menu screen. See page 30.
Sources
Enables or disables selected source options. See
page 31.
Network Settings
Congures network settings. See page 34.
Satellite Settings
Congures satellite settings. See page 31.
Other Settings
Displays other setting options of the TV set.
Using a Conditional Access Module
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
IMPORTANT: Insert or remove the CAM only when
the TV is SWITCHED OFF.
• In order to watch certain digital channels, a
conditional access module (CAM) is necessary.
This module must be inserted in the CI slot of
your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on and
then wait for few moments until the card is activated.
• When no module is inserted, “No common
interface module detected.” message appears
on the screen.
• Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select Settings by using
Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.

Toshiba 40L3451DN Specifications

General

Brand	Toshiba
Model	40L3451DN
Category	LCD TV
Language	English