58
PROBLEM SOLVING
English
Other problems
If your TV’s problem is not addressed in this Questions and
Answers section or the recommended solution has not
worked, do one of the following:
1 Turn off your TV. After 30 seconds, turn it on.
2 Turn off the TV and unplug the power cord. After 1
minute, plug the power cord in and turn on the TV.
3 Perform the Reset Factory Defaults procedure (see
page 50).
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
Condition
LED-1 LED-2
Green Orange Power ON
Programme Timer is set
Green OFF Power ON
Programme Timer is NOT set
Red Orange Power OFF (Standby)
Programme Timer is set
Red OFF Power OFF (Standby)
Programme Timer is NOT set
Orange Orange Active Standby (for OAD)
Programme Timer is set
Orange OFF Active Standby (for OAD)
Programme Timer is NOT set
Orange Green For Service
SW Upgrade in Progress
Red OFF For Service
SW Upgrade Failed
Green OFF For Service
SW Upgrade Successful
To Next Page
Loading...
