Connectin9 a VCRand antenna or CaNe TV (no CaNe box)
TVbackpanel
COLORSTREAMRD1,. _ WDEO
I IN
@l_@ _COLOR STREAM HD ,_ R@ i___/_1_===/]2IN
?
DIGITAL
ANT/CABLE AUDIO OUT StereoVCR
From Cable TV or antenna
You will need:
• coaxial cables
• standard A/V cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO I at the same time or the picture
performance will be unacceptable.
- If you have a mono VCR, connect L/MONO on the TV
to your VCR_ audio out terminal using the white audio
cable only
To view the antenna or Cable signal:
Select the ANT/CABLEvideo input source on the TV.*
To view the VCR:
Turn ON the VCR. Select the VIDEO1video input source on
the TV.*
* To select the video input source, press INPUTon the remote control
(E_spage 22). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording,use, distribution, or revision of television
programs, videotapes, DVDs,and other materials is prohibited underthe
Copyright Laws ofthe United States andother countries, andmay subject
you to civil and criminal liability.
13
To Next Page
Loading...
