Connectin9 a VCRwith S-video and a cane box
An S-video connection will provide better picture performance than a standard (composite) video cable.
TVbackpanel
COLOR STREAM HD 1 IN V/V/_I_ VIDEO 1 IN
DIGITAL
ANT/CABLE AUDIOOUT
StereoVCR
FromCable TV
Cablebox |
CH 4 OUT
You will need:
• coaxial cables
• S-video cable
- Do not connect both types of video came to VIDEO I
at the same time or the picture performance will be
unacceptable.
• standard audio cables
- If you have a mona VCR,connect L/MONO on the TV
toyour VCR_audio out terminal using the white audio
cable only
Note: When you use a CaMe box, you may not be able to use
the remote control to program or access certain features on
the TX
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLEvideo input
source on the TV.* Tune the TV to channel 3 or 4 (whichever
channel the Cable box output is set to). Use the Cable box
controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO1 video input source on
the TV.*
* To select the video input source, press iNPUT on the remote control
(E:_page 22). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs,and other materials is prohibited underthe
Copyright Laws ofthe United States andother countries, andmay subject
you to civil and criminal liability,
14
To Next Page
Loading...
