Toshiba 40RV52U - Chapter 2: Connecting Your TV (Continued); Connecting a Digital Audio System

Connectinga digital audio system
The TV's DIGITALAUDIOOUTterminal outputs a Dolby ®*
Digital mDOL,*_,_,_or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby ®Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
--1 DoihyDigRaldecoderor
otherdigitaJ audiosystem I 0 I
xr\.>_.-, ,,,_,N
TV hackpanel
To control the audio:
1 Turn on the TV and the digital audio device.
Dr ss MENU
e_ © on the TV's remote control and open the Audio
menu.
3 Highlight Audio Setup and press @.
4
Audio Settings
Ad ..... d Audio Settings
In the Optical Output Format field, select either DoJby
Digitalor PeN, depending on your device ( _' Selecting
the optical audio output format" on page 45).
iiiiiiiiiDobyDg..... iiiiiiiiii
Compressed
Dynamm Range Control iiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiReset iiiiiiiiiiiiiiiiiiiiiiiiiDone !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Note:
Some audio systems may not be compatible with Do/by
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTX
The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connectingan audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
• standard audio cables
TV backpanel V
To control the audio:
1 Turn on the TV and the stereo amplifier.
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV's
volume control or the amplifier's volume control.
Menu item of Speakers can turn to OFF to mute the TV's
built in speakers.
Advanced Aud!o Se[!ings .....................
Audio Setup
Treble 10
iiiiiiii!iiiiil;i_ii_iiiiiin_iii_ei_nii¢¸il;ii{_s:i_iiiiiiiiii;ii_ ii}ifiiei"_¸¸ " _ _ _ • _ _ _ :ii!iii!
19