Toshiba 40RV52U - Chapter 4: Menu Layout and Navigation (Continued); Navigating TV Menus

Setup/Installationmenu layout
The Installation menu contains the Terrestrial and System Status menus.
To open the Installati0n menu (illustrated below), press ,_u on the remote control or TV control panel, open the Setup menu,
select Installati0n, and press @.
Terrestrial Input Configuration --" [Opens the Input Configuration menu]
--" [Start] --" [Scans for new channels on
Channel Program ANT/CABLE]
Channel Add/Delete _ [Opens the Channel Add/Delete menu]
Channel Tuning Mode _ Standard/Auto/Digital
--" Pacific/Alaska/Hawaii/Atlantic/Newfoundland/Eastern/Central/
Time Zone
Mountain
Signal Meter --" [Opens the Signal Meter menu]
SystemStatus
System Information _ [Opens the System Information screen]
Navigating the menusystem
You can use the buttons on the remote control or TV control
panel to access and navigate your TV's on-screen menu
system.
* Press M_uto open the menu system.
* When a menu is open, use the up/down/left/right arrow
buttons (A'_'41_) on the remote control or TV control
panel to move in the corresponding direction in the menu.
* Press @ to save your menu settings or select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
* All menus close automatically if you do not make a
selection within 60 seconds, except the signal meter menu,
which closes automatically after about 5 minutes.
* To close a menu instantly, press E×_O*.
Note:
• The menu background may sometimes appear black,
depending on the signal the TV is receiving. This is not a
sign of malfunction.
• The Video sub-menu appears with a black background,
which looks different from other menus.
29