Selectingthe videoinputsource
to view
To select the video input source to view:
] Press _) on the remote control or TV control panel.
2 And then either:
a) Press 0-8; or
b) Repeatedly press AV on the remote control and then
press @ to change the input; or
c) Repeatedly press @ on the remote control or TV
control panel to change the input.
The current signal source displays in the top right corner
of the inputSelection screen.
io aH/cp,
@ Video 1
@ Video 2
O ColorStream HD1
ColorStream HD2
@ HDMI 1
HDMI 2
@ HDMI 3
Q PC
_-_ [ @ to Se{ect @ Navigation
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(_ "Labeling the video input sources" at right).
Soumes can be "hidden" (_v "Labeling the video input
soumes" at right).
"No Video Signal" will appear randomly on the screen if no
signal is received in video input mode.
If CEC device is connected to a HDMI input, the HDMI
Control icon will appea_
If a HDMI Control device with HDMI switching
capability (e.g. Audio Receiver) is connected to the
HDMI input:
Press _ on the remote or TV control panel repeatedly to
highlight HDMI 1, HDMI 2, or HDMI 3.
If the connected CEC device has any connected devices,
a separate device selection popup window will appear.
Press @ repeatedly to highlight the desired input source, and
then press E_r.
Note.
• When selecting HDMI Control input sources from the
popup window using @, some HDMI Control devices
may automatically turn on.
• When selecting input sources using A V, you will have
to press @ to actually select a particular device from the
popup window.
Labeling the video input sources
You can label each video input source according to the type
of device you connected to each source, from the following
preset list of labels:
• - - (defimlt label)
• Audio Receiver
• Cable
• Compact Disc
• DTV
• DVD
• Game Console
• HDMI Switch (HDMI inputs only)
• Laser Disc
• Satellite/DSS
• VCR
• Video Recorder
• Hide (to hide an unused input in the inputSelection screen and
in the Channel Browser TM Inputs list)
Note: If you select PC in the Input Selection screen, you can
choose only "- -", "GameConsole" or "Hide" as the label.
To label the video input sources:
1 Press M_uand open the Preferencesmenu.
Highlight InputLabelingand press @.
3
i!;_iiiiiiiii!_!i!i_i!i!_i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!_!_!i!_i_i_i_i_!_!;)_!_!i!!!!!i!_i_i_i_i!;!i!i!_i!i!i!i_;i_i_ii_i_!!_!i_!_i!i!!!!!_!i;i_i_i_i_:i_iTM
88seiec{o;......................................................
..............................S_
Charm e] Labe]!ng ............................................
Menu Language English
Channel Browser Setup
Press & or T to highlight the video source you want to
label.
PC
(continued)
35
To Next Page
Loading...
