4
5
Press 4 or _ to select the desired label for that input
source. If a particular input is not used, you can select
Ride as the label, which will cause that input to be "grayed
out" in the Input Selection screen and skipped over when
you press @ on the remote control.
To save the new input labels, highlight Doneand
press @.
To revert to the factory default labels, highlight Reset and
press @.
Input labeling example:
The screen below left shows the default Input Selection
screen (with none of the inputs labeled as a specific device).
The screen below right is an example of how you could label
the inputs if you connected a VCR to VIDEO l, Cable TV
to VIDEO 2, a video recorder to ColorStream HD 1, a DTV
settop box to HDMI l, a satellite/DSS set-top box to HDMI 2,
and a DVD player to HDMI 3. Also note that the ColorStream
HD2 input is labeled "Hidden", which means that input will
be skipped over when 6_) is pressed.
_(0_ NT/C AL/L_!
@ Video 1
@ Video 2
ColorStream HD1
ColorStream HD2
@ HDM] 1
HDMI 2
HDMI 3
O PC
InputSelectionscreenwith
no inputslabeled.
_ VCR_NTiCABLE
@ Cable
Video Recorder
@ DTV
gatellite/DSS
DVD
Q PC
Q o _ / _ to Select _Navigation
v
InputSelectionscreenwith
all inputslabeledexceptinput4,
whichhasbeenhidden.
To clear the input labels:
1 Pr SS MENU
e_ o and open the Preferences menu.
2 Highlight Input Labelingand press @.
3 Highlight Reset and press @.
Tunin9channels
Tunin9channelsusing the
ChannelBrowserTM
The Channel Browser TM provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
• Navigate the contents of all of your inputs.
• Keep a list of your favorite channels (see "Favorites
Browser" below).
• Keep a history of the last 32 channels or inputs viewed.
• Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser TM History List (illustrated on
the next page).
• Surf via Browse mode (to immediately tune channels as
you highlight them in the Channel Browser TM) or Select
mode (to surf over channels in the Channel Browser TM
before you select one to tune).
• Quickly change inputs from the Inputs List.
• Quickly select HDMI Control devices from the HDMI
Control List.
FavoritesBrowser
The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel Browser TM.
To add a favorite channel/input:
1 Tune to the channel or input.
Press and hold FAyBR_)WSE,for 3 seconds.
Note: Additions are added to the beginning of the Favorites
list on the left side of the Channel Browser TM.
To delete a favorite channel/input:
1 Press _AVBROWSERto open the Favorites browser list.
Highlight the channel or input to delete by pressing
3 Press and hold (_) for 3 seconds. The channel/input will
be removed from the Favorites list.
3fi
To Next Page
Loading...
