Blockingchannels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
To block channels:
1 Dr ss MENU
e_ © and highlight the Locksmenu icon.
2 Press V to display the PIN code entering screen.
3 Enter your four-digit PIN code and press @
(_' page 48).
4 Press V to highlight ChannelsBlockand then press @
. A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
5
Input Lock 0 f
Contont Pane[ Lock Off
GameTimer 0 f
New PIN Cod
Press AV to highlight the channel you want to block
and press @, which puts an "×" in the box next to that
channel.
6 Repeat step 5 for other channels you want to block.
7 Highlight Bone and press @.
To unblock individual channels:
In step 5 above, press _,V to highlight the channel you want
to unblock, press @ to remove the "X" from the box, highlight
D0ne and press @.
To block all channels at once:
Highlight BlOCkAll in step 5 on previous page and then
highlight Bone and press @.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Bone and press @.
Unlockingprogramstemporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
You can either temporarily unlock the program or select an
unlocked program to watch.
To
1
2
temporarily unlock the program:
Press M_E
Enter your four-digit PIN code and press @. If the correct
code is entered, the program lock mode is released and
the normal picture appears. All locking is disabled until
the TV is turned oft', and will be enabled when the TV is
turned on again.
Usingthe inputlockfeature
You can use the Input Lock feature to lock the video inputs
(VIDEO1,VIDEO2, ColerStrearnHD-1,ColorStrearnHB-2,
HDNI1, HDNi2, HDNI3 and PC) and channels 3 and 4. You
will not be able to view the input sources or channels until you
unlock the inputs.
To
1
lock/unlock the video inputs:
From the Locksmenu, Press V to display the PIN code
entering screen.
Enter your four-digit PIN code and press @.
3 Press V to highlight input L0ck and press _.
4 Press A or V to select the level of video input locking
you prefer, as described below.
5
Video
Video+
Off
Press @.
Locks VIDEO l, VIDEO 2,
ColorStream HD 1/HD2, HDMI l,
HDMI 2, HDMI 3, and PC.
Locks VIDEO l, VIDEO 2,
ColorStream HD I/HD2, HDMI l,
HDMI 2, HDMI 3, PC and channels 3
and 4.
• Select Vide0+ if you play video
tapes via an ANT/CABLE input.
Unlocks all video inputs and channels
3 and 4.
48
To Next Page
Loading...
