Usin9the GameTimer®
You can use the GameTimer to set a time limit for playing a
video game (30-120 minutes). When the GameTimer expires,
the TV enters Input Lock mode and locks out the input source
for the video game device..
To set the GameTirner_:
1 From the Locks menu, press T to display the PIN code
entering screen.
2 Enter your four-digit PIN code and press @.
3 Press V to highlight GameTimerand press _.
4 Press A or V to select the length of time until the Input
Lock is activated (30, 60, 90, or 120 minutes) and press
0.
To cancel the GarneTimer"_:
Select Offin step 4 above.
To deactivate the Input Lock once the GarneTirner _"
has activated it:
Set the Input Lock to Off(_, "Using the input lock feature"
as described above).
Note:
• A message will appear when 10minutes, 3 minutes, and 1
minute remainon the GameTime_
If the TVIosespower with timeremaining on the GameTimer,
whenpower is restored the TV will enter Input Lock mode (as
if the GameTimerhad been activated) and you willhave to
deactivate theInput Lock (as described above).
Usingthe controlpanellock feature
You can lock the control panel to prevent your settings from
being changed accidentally (by children, for example). When
the control panel lock is On, none of the controls on the TV
control panel will operate except POWER.
To lock the control panel:
1 Pr SS MENU
e_ O and highlight the Locksmenu icon.
Press V to display the PIN code entering screen.
3 Enter your four-digit PIN code and press @.
Press V to highlight ControlPanelLock.
5 Press I_ and A or V to highlight On and press _. When
the control panel is locked and any button on the control
panel (except POWER) is pressed, the message "NOT
AVAILABLE" appears.
Edit Rating Limits
ChanneJs BJock
........... ............ ; 8
GameTimer (3 _
To unlock the control panel:
Highlight Offin step 5 above, or press and hold the VOLUNE
- button on the TV control panel for about 10 seconds until
the volume icon appears.
Usin9the PCsettings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut oft, readjust the Horizontal
Positionand Vertical Position.If the picture is affected by
interference, readjust the ClOCkPhase and SamplingClock.
To adjust the PC settings:
1 Repeatedly press @ to select PC input mode
(_' "Selecting the video input source to view" page 35).
Press M_uand open the Setup menu.
3 Highlight PCSettingsand press E@.
Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Setup menu.
4 Press A or V to highlight the item you want to adjust.
5 Press 4 or _ to make the appropriate adjustments.
W_tioaIPosition
Clock Phase
Auto Adjust
iiiiiiiiiiiillIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIiii!_i!!_?)ii_iiii!i_!i_ii!i_iiiii;i;l_ll_lllllllllll_l!il_l_!i_ll!l_lli_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_)_)_l_i_!illl_i_i!ll_i_ilil_liii!_i_iliiliiliiliil_!iil_il_l_l_l_l_l_i_iii_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_li_
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!iRosot!!!!!!!!!!!!!!!!!!!!!Done!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Note: The screen is disrupted momentarily when adjusting
the PC settings. This is not a sign of malfunction.
Horizontal Moves the picture left/right.
Position The adjustment range is within _+50from center.*
Vertical Moves the picture up/down.
Position The adjustment range is within _+10from center.*
Clock Phase Helps to reduce noise and sharpen the picture.
The adjustment range is within _+16from center.*
Helps to reduce noise and minimize periodic
Sampling
Clock vertical stripes on the screen.
The adjustment range is within _+!0 from center.*
Highlight this item then press @ to get an
Auto Adjust optimum adjustment automatically.
* The default settings may vary depending on the input signal
format.
49
To Next Page
Loading...
