45
CONTROLS AND FEATURES
English
To select a file in the list of contents:
a
Press
B
or
b
to select a file or folder.
b
Press
Q
to move to the next layer, or press
RETURN
to return to the previous layer.
To close the Media Player:
a
Press
EXIT
.
To set the Media Server Setup:
You only need to complete the Media Server Setup if
you want to store a list of DMSs to activate later from
the TV.
a
In the
APPLICATIONS
menu, highlight
Media
Player
, and then press
Q
.
b
Press
B
or
b
to highlight
Setup
, and press
Q
.
c
Press
B
or
b
to highlight
Media Server Setup
, and
press
Q
. A list of currently available DMSs will
appear.
d
Press
B
or
b
to select the desired device, and press
Q
. A check will appear in the box. To remove the
check, press again.
e
Press
c
to highlight
Done
, and then press
Q
to save.
NOTE:
• Up to 8 DMSes can be selected.
• If the device is checked, it will still be displayed (with gray
out) in the
Select Device
window, even if it is currently
powered off. When
Q
is pressed with the highlight on a
grayed out item, a confirmation window for Wake-on-LAN
will be displayed. If
Yes
is selected, the TV will attempt to
power up ("wake up") the DMS. If the server supports Wake-
on-LAN, it will start up.
• When several DMSs are connected, it may take some time
for the list to be displayed.
The following operations may help to improve the display
time.
- Close the device selection window, and open it again.
-Press the
RED
button to update the list.
There are three types of viewing modes.
Multi View
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each image
file.
The initial highlighted position will be on the top left thumbnail
in the Multi View.
a
Press
B
b
C
c
to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing
C
at the top left thumbnail, the screen will
move to the previous page. Conversely, when pressing
c
at the bottom right thumbnail, the screen will move
to the next page.
P
U
P
u
buttons can be used to page up/down the
photo list when there are more photos than will fit onto
one screen. When the
P
U
P
u
buttons are pressed, the
highlight shall be on the photo at the top left of
Previous/Next list.
b
When you select a folder, press
Q
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
Press
Q
to view the selected photo in Single View
mode.
Viewing photo files
Photo
/Folder Sort: Title
1/54
E05265464.jpg
10:00 Fri, 21 Feb 2010
1920x1080
Page BackSelectOK P RETURN
QUICK
Features
WL75_WebOM_UK.book Page 45 Thursday, June 17, 2010 7:10 PM
To Next Page
Loading...
