62
CONTROLS AND FEATURES
English
Adjusting the
Sampling Clock
alters the number of pulses per
scan, this will clear vertical lines on the screen.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
Q
to select, and then
b
to highlight
Sampling
Clock
.
c
Use
C
or
c
to adjust until the picture clears.
Use Reset to return all items to the original factory settings.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
Q
to select, and then
b
to highlight
Reset
.
c
Press
Q
.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Input selection and AV
connections
See page 9 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct
Input
socket.
Alternatively, press the external source selection button
o
until the picture from connected equipment is shown.
An
S
in the display
e.g.
o
2S
(
EXT 2S
), indicates the input is set
for an S-Video signal.
Use the Input Selection window if the television does not switch
over automatically.
a
By pressing
o
on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
HDMI
®
displays equipment connected to
Input HDMI
on the back or side of the television.
PC displays a computer connected to
Input RGB
/
PC
on
the back of the television.
Sampling Clock
Reset
Input selection
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
Inputs
DTV TV
DTV RADIO *
DTV TEXT *
1
2
3
4
4
HDMI 3
HDMI 2
ATV
HDMI 4
PC
HDMI 1
Pressing
o
on the
remote control
Pressing
o
on the TV
right side panel
*
If radio or text channels
are currently available for
DTV.
WL75_WebOM_UK.book Page 62 Thursday, June 17, 2010 7:10 PM
To Next Page
Loading...
