Toshiba 42RV635DB - Connecting a Computer via RGB;PC; Connecting a PC to the PC Terminal

10
Connecting a computer via RGB/PC
The back of your
television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion adaptor if required (not supplied)
RGB PC cable
(not supplied)
Mini D-sub
15 pin connector
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Connect the PC cable from the computer to the PC terminal
on the back of the television, then the audio cable to the
PC/HDMI1 Audio socket on the back of the television. Select
PC from the PC/HDMI1 Audio options in the AV
connection menu located in the SET UP menu.
Press the
B
to select PC mode.
IMPORTANT NOTE: Some PCs when connected they
may not display correctly.
PLEASE NOTE:
Some PC models cannot be connected to this television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15 pin terminal.
A band may appear at the edges of the screen or parts of
the picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.
When PC input mode is selected some of the television’s
features will be unavailable e.g. Manual setting in the SET
UP menu, Colour, Tint, DNR and Black Stretch in the
Picture settings menu.
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 X 480
59.940Hz 31.469kHz 25.175MHz
72.809Hz 37.861kHz 31.500MHz
75.000Hz 37.500kHz 31.500MHz
SVGA 800 X 600
60.317Hz 37.879kHz 40.000MHz
72.188Hz 48.077kHz 50.000MHz
75.000Hz 46.875kHz 49.500MHz
XGA 1024 X 768
60.004Hz 48.363kHz 65.000MHz
70.069Hz 56.476kHz 75.000MHz
75.029Hz 60.023kHz 78.750MHz
WXGA
1280 X 768
59.995Hz 47.396kHz 68.250MHz
59.870Hz 47.776kHz 79.500MHz
74.893Hz 60.289kHz 102.250MHz
1360 X 768 60.015Hz 47.712kHz 85.500MHz
SXGA 1280 X 1024
60.020Hz 63.981kHz 108.000MHz
75.025Hz 79.976kHz 135.000MHz
Pin assignment for RGB/PC terminal
Signal information for Mini D-sub 15 pin connector
Pin No. Signal name Pin No. Signal name
1 R 9 NC
2 G 10 Ground
3 B 11 NC
4
NC
(not connected)
12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
Acceptable PC signals through the PC terminal