To Next PageTo Next Page
Need help?Do you have a question about the Toshiba 42RV600T and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Display Type | LCD |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Brightness | 500 cd/m² |
| Refresh Rate | 50 Hz |
| Response Time | 8 ms |
| VGA Port | 1 |
| Resolution | 1920 x 1080 pixels |
| Viewing Angle | 178 degrees |
| Audio Output | 20 W |
Introduction to the manual and TV features.
Crucial precautions for safe TV usage.
Guidelines for safe TV placement and electrical connection.
Safety guidelines on TV placement, environment, and handling.
Safety instructions for operating the TV, preventing fire, and electric shock.
Safety regarding power cord handling, service, and disposal.
Safety regarding power plug maintenance, screen care, and interference.
Information on afterimages and Toshiba's liability limitations.
Details about Audyssey EQ and HDMI trademarks.
Warnings against self-repair and procedures for handling malfunctions.
Guidance on proper disposal of the TV at the end of its life.
How to clean the TV safely using appropriate materials.
Instructions for connecting an aerial for optimal TV reception.
Initial steps to familiarize with the new television.
Guide to inserting batteries into the remote control.
Description of all buttons and indicators on the TV's front and side panels.
Detailed explanation of each connection port on the TV's back panel.
Detailed guide to using the remote control for TV operations.
How to use the remote control for REGZA-LINK compatible devices.
Step-by-step guide to power on the television.
Instructions for turning off the TV and putting it into standby mode.
How to change the language for on-screen menus and information.
Adjusting the picture position for optimal viewing.
Method to quickly switch between two previously viewed channels.
How to view current TV status and input information.
Automatically scans for and stores available TV channels.
Manually fine-tuning and arranging channels in memory.
How to manually search for channels up or down the band.
Fine-tuning picture and sound for a specific channel.
How to create custom labels for input sources or channels.
Overview of picture control settings.
How to adjust the aspect ratio and size of the displayed picture.
Using the non-scaling display mode for optimal PC input.
Function to freeze the current image on the screen.
How to fine-tune the horizontal and vertical position of the picture.
Selecting preset picture styles for different viewing scenarios.
Adjusting the contrast in dark areas of the picture.
Optimizing picture for movie playback with 24fps conversion.
Customizing picture settings and saving them as user preferences.
Modifying the picture's tint by adjusting red, green, or blue levels.
Reducing graininess or mosquito noise in MPEG video signals.
Improving picture quality by reducing digital noise in weak signals.
Fine-tuning individual colour levels (Red, Green, Blue, etc.).
Configuring stereo, mono, or bilingual audio reception.
How to select stereo or monaural sound for broadcasts.
Choosing between different audio tracks for bilingual broadcasts.
Fine-tuning bass, treble, and balance for optimal audio.
Enhancing audio with surround sound, voice enhancement, and bass boost.
Limiting volume fluctuations between programs or commercials.
Setting the TV to turn on or off automatically at a specified time.
Automatically adjusting picture format for HDMI signals.
Enabling a blue screen display when no signal is received.
Expanding 4:3 aspect ratio content to fill the screen.
Adjusting the brightness of the side panel indicators.
How to view a secondary picture on the screen (Picture-in-Picture).
Adjusting the location of the sub-picture within the screen.
Swapping the main and sub-picture displays.
How to exit the Picture-in-Picture viewing mode.
Automatically turning on connected devices and switching inputs.
Synchronizing standby status between the TV and connected devices.
Controlling audio output and volume via AV amplifier.
Enabling features like TV Auto Power and Auto Standby.
Configuring REGZA-LINK settings and features.
Selecting REGZA-LINK enabled devices from the input list.
Operating connected REGZA-LINK devices using the TV remote.
Adjusting picture settings for REGZA-LINK connected PCs.
Configuring teletext language and modes (Auto/List).
Choosing the display language for teletext information.
Selecting between Auto and List modes for teletext viewing.
How to use the TEXT button and understand teletext basics.
How to turn subtitles on or off for available channels.
How to use Auto mode for teletext with FASTEXT or page numbers.
How to use List mode for teletext, including managing favorite pages.
Explains functions of specific teletext buttons on the remote.
How to connect external devices to the TV's side ports.
How to connect external devices to the TV's rear ports.
Instructions for connecting HDMI and DVI sources to the TV.
Detailed guide on connecting HDMI and DVI equipment to the TV.
Specific steps for connecting devices via HDMI.
Specific steps for connecting devices via DVI using an adapter.
Fine-tuning the picture's horizontal and vertical position for PC input.
Optimizing clock phase for clear PC picture display.
Fine-tuning sampling clock to prevent picture blurring or artifacts.
Restoring PC settings to factory defaults.
Manually starting the Media Player application.
How to view individual JPEG files in Single View mode.
Setting up and viewing photos in an automated slideshow.
Solutions for common TV problems and symptoms.
Information on screen pixel behavior and common image problems.
Troubleshooting steps for remote control and REGZA-LINK malfunctions.
