19
Using the TV’s features
Dot by Dot
“Dot by Dot” is a non-scaling display. Depending
on the input signal format, the picture is
displayed with side panels and/or bars at the top
and bottom (i.e. VGA input source).
Notes:
• In the PC connected via HDMI or RGB/PC
terminal (- page 32), the picture size
selection is PC Wide, PC Normal or Dot by
Dot only.
• Using the special functions to change the
size of the displayed image (e.g. changing the
height/width ratio) for the purpose of public
display or commercial gain may infringe on
copyright laws.
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video programme, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
• When using the PC connected via HDMI or
RGB/PC terminal, the moving image quality
may be deteriorated.
Using the picture still
• Press r to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press r again.
(Moving) (Still)
Note:
If you use this function except for the purpose of
your private viewing and listening, it may infringe
the copyright protected by the copyright laws.
Adjusting the picture position
Adjustment to the position of the picture may be
made to suit your viewing preferences.
1 Press MENU, then press Y or Z to display
the SET UP menu.
SET UP
Language
Auto tuning
Manual tuning
Manual setting
AV connection
PC Setting
Picture position
Quick Setup
Location
English
Home
2 Press V or U to select Picture position.
3 Press Q, then press V or U to select the
item you want to adjust.
Picture position
Horizontal position
Vertical position
Reset
0
0
4 Press Y or Z to adjust the settings as
desired.
Horizontal position
0
Notes:
• When the picture size is in Wide or 4:3 mode,
only the Horizontal position can be adjusted.
• When the picture size is in Native, PC Wide,
PC Normal and Dot by Dot mode, none of this
function will be available.
Resetting the picture position
This function resets your picture position settings
to the factory settings.
1 From the Picture position menu, press V or
U to select Reset.
2 Press Q.
Activating the Picture Mode
This TV offers the choice of personalising the
picture style.
AutoView, Dynamic, Standard, Mild, Movie,
Game and PC (PC Fine) are preset options and
affect many features/settings within the TV.
324246RV600ETY_En.indd 19324246RV600ETY_En.indd 19 7/28/2009 10:08:13 AM7/28/2009 10:08:13 AM
To Next Page
Loading...
Need help?
General
