English - 18 -
(**) Limited Models Only
Settings Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic
and Natural.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture
mode options will be available instead of Cinema and Natural modes.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
or .
Note: Mode.
Backlight
lable if the Energy Saving
is set to Custom (will be located under the Energy Saving setting). Highlight and use
Left/Right directional buttons to set.
Picture Zoom
Sets the desired image size format.
Picture Shift
This option may be available depending on the Picture Zoom setting (will be located
under the Picture Zoom setting). Highlight and press OK, then use directional buttons
to shift the picture upwards or downwards.
Tru HDR
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
White Point
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the ‘warmth’ or ‘coolness’ of the picture by
pressing Left or Right buttons.
Tru Blue
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Tru Micro
Dimming
Low, Medium, High and options are available. While Tru Micro Dimming is active,
Noise Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Tru Contour
Low, Medium, High and options are available. While Tru Contour is active, it will
Tru Flow
Press left/right buttons to set Tru Flow to Low, Medium, High or . While Tru Flow
is active, it will optimize the TV’s video settings for motional images to acquire a better
quality and readability.
Tru Flow
Demo
When Tru Flow option is set to Low, Medium or High, this option will be available (will
be located under the Tru Flow setting). Press OK button to activate the demo mode.
While demo mode is active, the screen will be divided into two sections, one displaying
the Tru Flow activity, the other displaying the normal settings for TV screen. Press
OK button again to cancel.
To Next Page
Loading...
