English - 7 -
(**) Limited Models Only
changing the setting of the Auto Power Down option
from the Settings>System>More menu.
TV Control Switch & Operation (**)
Note:
on the model.
1. Up direction
2. Down direction
3.
The control switch allows you to control the Volume
/ Programme / Source and Standby-On functions of
the TV.
To change volume: Increase the volume by pushing
the switch up. Decrease the volume by pushing the
switch down.
To change channel: Press the middle of the switch
in, the information banner will appear on the screen.
Scroll through the stored channels by pushing the
switch up or down.
To change source: Press the middle of the switch in
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available
sources by pushing the switch up or down.
Press the middle of the switch in
and hold it down for a few seconds, the TV will turn
into standby mode.
To turn on the TV: Press the middle of the switch in,
the TV will turn on.
Notes:
the volume setting.
Main menu OSD cannot be displayed via control switch.
Operation with the Remote Control
Press the Menu button on your remote control to
display main menu. Use the directional buttons and
OK button to navigate and set. Press Return/Back
or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to your
the
Source button on your remote control consecutively
Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.
Forced Standby
If your TV stops responding to commands, you can per-
form forced standby which will terminate the process.
In order to do this, press and hold the Standby button
on remote controller for about 5 seconds.
TV Control Button & Operation (**)
Note:
on the model.
Your TV has a single control button. This button allows
you to control the Standby-On / Source / Programme
and Volume functions of the TV.
Operating with the Control Button
Press the control button to display the function
options menu.
Then press the button consecutively to move the
focus to the desired option if needed.
Press and hold the button for about 2 seconds to
activate the selected option. The icon colour of the
option changes when activated.
Press the button once again to use the function or
enter the sub menu.
To select another function option, you will need to
hold the button to deactivate it. The icon colour of
the option changes when deactivated.
To close the function options menu do not press the
button for a period of about 5 seconds. The function
options menu will disappear.
Press the control button to display
the function options menu, the focus will be on the
Standby option. Press and hold the button for about
2 seconds to activate this option. The icon colour of
the option changes when activated. The TV will turn
To turn on the TV: Press the control button, the TV
will turn on.
To change volume: Press the control button to display
the function options menu and then press the button
To Next Page
Loading...
