English - 33 -
(**) Limited Models Only
You must change your modem’s SSID when there
Open the Network menu and select Network Type as
OK
OK to connect.
Note:
mode settings.
OK button on the remote control.
Network Type
as .
Save option in the Advanced Settings menu. Thus
you wont need to enter your password whenever
you switch to wireless network. After connecting to
your wireless network highlight Save option in the
Advanced Settings menu and press OK to save
wireless network Disconnect option will appear in the
Network menu. Highlight Disconnect and press OK
Internet Speed Test and press the OK button
Advanced and press the OK button to
Save and press the
OK
Connected or Not Connected and the current IP
WLAN
WLAN feature, you can
your TV.
of your TV.
Sources menu and press OK
OK
If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Networked Standby Mode
Networked Standby Mode is a standard that allows
a device to be turned on or woken up by a network
message. The message is sent to the device by a
program executed on a remote device connected to
the same local area network, such as a smartphone.
To enable this feature set the Networked Standby
Mode option in the Network menu as On. It is
necessary that both the device, from which the
network message will be sent to the TV, and the TV are
connected to the same network. Networked Standby
Mode feature is only supported for Android OS devices
and can be used via a variety of applications.
In order to use this feature the TV and the remote
device should be connected at least once while the
should be re-established, the next time it is switched
on. Otherwise this feature will be unavailable. This
does not apply, when the TV is switched into the
standby mode.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the
Networked Standby Mode option as .
Wireless Display
Wireless Display is a standard for streaming video and
sound content. This feature provides the ability to use
your TV as wireless display device.
Using with mobile devices
screens including graphical, video and audio content
between your mobile device and TV.
To Next Page
Loading...
