English - 39 -
(**) Limited Models Only
You will need to sign in to your Amazon account
Sign in with Amazon option on the
OK. An authentication code
will be created and displayed on the screen. Go to
the internet address (URL) as shown on the screen.
You will be directed to a page where you can sign in
signed in. Then you will be directed to a page where
you can enter the authentication code you see on
the TV and link your TV to your Amazon account.
If the linking process was successful you will be
asked to determine a name for your TV, called
‘Friendly Name’ in order to enable the TV skills.
By enabling the TV skills for Alexa you can control
changing channel or input source, controlling volume,
and more. A ‘Friendly Name’ is a name that reminds
you of your TV, such as ‘Living Room TV’, ‘Kitchen
TV’, ‘Dining Room TV’, etc. Choose an easy-to-say
name. You will use this name to tell Alexa which TV
to control. You can press Exit button on the remote to
skip this step if you don’t want to enable the TV skills
for Alexa. You can enable the TV skills later using
the Works With Alexa option in the Settings>Sys-
tem>Voice Assistant menu on your TV.
You will be ready to use Alexa. Examples about the
use of Alexa will be displayed on the next screen.
You can also watch an instructive video about it.
Highlight ‘Watch ‘how to use’ video’ and press OK
to watch. Highlight ‘OK’ and press OK to proceed
without watching the video.
In the last step you will be informed about Alexa On
Standby Mode feature and that you will be able to
use your box while the TV is in standby mode. You
can disable this feature from the related Alexa menu
on the TV. Press OK to complete the setup process.
Note:
Watch ‘how to setup’ video, Learn More and Setup
Later options available. To watch an instructive video
about the setup process highlight Watch ‘how to
setup’ video and press OK. If you possess an Alexa
device and you want to enable the TV skills for Alexa in
order to control your TV via your Alexa device, highlight
Learn more option and press OK to proceed. If you
want to skip the setup process, highlight Setup Later
and press OK.
Works With Alexa (**)
You can control the functions of your TV with Alexa.
In order to do this, the setup process should be
completed. The setup can be carried out in the ways
described below.
Use the Works With Alexa option in the Set-
tings>System>Voice Assistant menu
wizard will be displayed after the installation process
is completed
Setup process
The wizard will guide you through the setup process.
the Alexa setup wizard will be displayed after the
highlight Learn More option and press OK. On the
next screen you will be informed about the feature.
Highlight Start and press OK to proceed.
-
tion you can use the Works With Alexa option in the
Settings>System>Voice Assistant menu to carry
will be informed about the feature. Highlight Start
and press OK to proceed.
An authentication code will be created and displayed
on the screen. Use your computer or any other device
with internet access to go to the internet address
(URL) shown on the screen. You will be directed
to a page where you can sign in to your Amazon
you will be directed to a page where you can enter
the authentication code you see on the TV and link
your TV to your Amazon account.
If the linking process was successful you will be
asked to determine a name for your TV, called
‘Friendly Name’(FN). A ‘Friendly Name’ is a name
that reminds you of your TV, such as ‘Living Room
TV’, ‘Kitchen TV’, ‘Dining Room TV’, etc. Choose an
easy-to-say name. You will say this name to tell Alexa
which TV to control. When you are done, highlight
OK and press OK.
Examples about the use of the feature will be
displayed on the next screen. Press OK
the setup.
-
wizard when you press OK. In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Interacting with Alexa (**)
To activate Alexa and make it listen what you are
saying, just say “Alexa”. You can also press and hold
the Prime Video button on the remote for about 3
seconds to do that. When Alexa is activated its logo
will appear on the lower right corner of the TV screen.
You can press the Exit button on your TV remote to
end the Alexa’s response to your request.
To Next Page
Loading...
