OUT
\())
Back of
IR
receiver/repeater control system
(not included)
Optical
audio
cable
o
o
o
o
TV
back
panel
Connecting
a
digital
audio
system
The TV's DIGITAL AUDIO OUT
terminal
outputs
a
Dolby® Digital
or
2-channel
down-mixed
peM
(pulse-
code
modulation)
signal for
use
with
an
external
Dolby
Digital
decoder
or
other
external
audio
systems
with
optical
audio
input.
You
will
need:
• Optical
audio
cable (Use
an
optical
audio
cable
that
has
the
larger
TosLink connector,
not
the
smaller
mini
-optical connector.)
Dolby
Digital
decoder
or
other
digital
audio
system
IR
cable
~-::~J+ow
'-=------
TV
back
panel
Using
the
IR IN
terminal
For
additional
control
options
for
your
home
theater
system,
you
can
connect
an
IR receiver/
repeater
control
system
(not
included)
to the TV's IR
IN
terminal.
You
will
need:
• IR cable
To
set
the
IR
IN
mode:
1
~u
>
Settings>
PREFERENCES> IR
Control.
2 Press
~
or
~
to select In.
To
operate
the
TV
with
this connection,
point
the
Toshiba TV
remote
control
toward
the front of
the
IR
receiver
/repeater
control system.
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may not
work properly, creating
a high noise level that may
damage speakers or headphones.
THIS
DAMAGE
IS
NOT COVERED BY
YOUR
WARRANTY
•
The
DIGITAL AUDIO OUT terminal may not outputsome
digital audio sources due
to
copy
restrictions.
IR
receiver/repeater
control system
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
To
view
the
HOMI
device
video:
Press
IINPUTI
and
...
or
T to select the
HDMI1,
HDMI
2,
HDMI 3,
or
HDMI
4.
To
connect
a
OVI
device,
you
will
need:
•
One
HDMI-to-DVI
adapter
cable
16
To Next Page
Loading...
