Toshiba 47TL515U - Advanced Network Configuration

26
Chapter 4: Initial Setup and Menu
Initial Setup
When you first turn on or reset the TV, the Initial Setup
window will appear.
Note:
• You can stop Initial Setup by pressing . However, if
you do not finish Initial Setup, the Initial Setup screen will
appear every time you turn on your TV. To finish Initial
Setup, see “Changing Initial settings” (- p. 30).
• does not work until Menu Language, Time Zone,
and Location have been set.
1 Menu Language
2 Time Zone
3 Daylight Saving Time
4 Location
Note: Model 42TL515U is not ENERGY STAR
®
qualified.
5 ANT/CABLE
To select Antenna:
To select Cable:
Note: If you do not want to scan channels, you do not
need to make a selection for ANT/CABLE. Select
Next and press to skip this step.
Menu Language English
Quick Setup
Select a language. Press .
OK
Time Zone
Daylight Saving Time
Eastern
Off
Local Time Setting
Select a time zone.
Time Zone
Daylight Saving Time
Eastern
Off
Local Time Setting
Select On or Off. Press .
OK
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal use.
(ENERGY STAR® qualified)
Home
Location
Select Home for normal home use. Press .
OK
Antenna
Next
ANT/CABLE In
Please confirm the connection with Tuner Input.
Cable
First, select
Antenna.
Then, select Next. Press .
OK
Channel Tuning Mode Auto
Channel Tuning Mode
Select Auto, Digital, or Standard
(- “Setting the Channel Tuning
Mode” on p. 39). Press .
OK
Antenna
Next
ANT/CABLE In
Please confirm the connection with Tuner Input.
Cable
First, select
Cable.
Then, select Next. Press .
OK
OK