EasyManua.ls Logo

Toshiba 47VL900A - DNR - Digital Noise Reduction; Active Vision; Resetting the Advanced Picture Settings; Automatic Format (Widescreen)

Toshiba 47VL900A
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROLS AND FEATURES
35
DNR – Digital Noise Reduction
DNR allows you to ‘soften’ the screen representation
of a weak signal to reduce the noise e ect.
a
Select DNR from the Noise Reduction
menu.
b
Press
C
or
c
to select Low, Middle, High,
Auto or O . The di erences may not always
be noticeable (for the best result use lower
settings as picture quality can be lost if the
setting is too high).
Active Vision
This feature will reduce picture blur without
decreasing image brightness or adding  icker.
a
In the Advanced Picture Settings menu,
press
B
or
b
to select Active Vision.
b
Press
C
or
c
to select High, Middle,
Standard or O .
NOTE: When Picture Mode is set to Game, this
feature will be grayed out and automatically set to
O .
Resetting the advanced picture settings
This feature allows you to reset the current Advanced
Picture Settings to the default values.
a
In the Advanced Picture Settings menu,
press
B
or
b
to select Reset.
b
Press OK.
Automatic Format (Widescreen)
When this television receives a true Widescreen picture
and Auto format is On, it will automatically be
displayed in Widescreen format irrespective of the
television’s previous setting.
a
Press MENU /
C
c
to highlight Setup icon.
b
Press
B
/
C
c
to highlight Preferences icon
and press OK.
c
Press
B
or
b
to select Display Settings and
press OK.
d
Press
B
or
b
to select Auto Format and
press
C
or
c
to select On or O .
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
4:3 Stretch
When 4:3 Stretch is activated, the size switching
system changes 4:3 programmes into full screen
picture.
a
In the Preferences menu, press
B
or
b
to
select Display Settings and press OK.
b
Press
B
or
b
to select 4:3 Stretch and press
C
or
c
to select On or O .
Blue Screen
When Blue Screen is selected, the screen will turn
blue and the sound will be muted on analogue
channels and external input modes when no signal is
received.
NOTE: Some external input sounds may not be
muted.
a
In the Preferences menu, press
B
or
b
to
select Blue Screen.
b
Press
C
or
c
to select On or O .
Picture Position
The picture position may be adjusted to suit personal
preference and can be particularly useful for external
inputs.
NOTE: The Picture Position feature cannot be
selected in the DTV mode.
a
In the Preferences menu, press
B
or
b
to
select Display Settings and press OK.
b
Press
B
or
b
to select Picture Position.
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
c
Press OK to view the options available for
the picture format that has been selected.

Table of Contents

Related product manuals