Connecting a device to the DVI/HDCP 1input
The DVI/HDCP input on your TV is designed to accept HDCP
program material in digital form from EIA/CEA-861-compliant 2
consumer electronic devices, such as a set-top box or DVD player
equipped with a DV1-D digital single-link output connection. 3
The DVI/HDCP input is designed for best performance with 1080i
high-definition video signals. The DVI/HDCP input also will accept
and display 480p, 720p, and 480i picture signals.
Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).
You will need:
• one coaxial cable
• one DVI-D digital single-link cable
Note: Forproper operaOon,the DVI D cablelength
should not exceed 3m C98 ft) Therecommended
lengthis 2m (6:6 ft)
• one pair of standard audio cables
DVI/HDCP device
(for example, set4op box or DVD player)
v,oEo _u_
TV
From
Antenna
or Cable
Notes:
DVI/HDCP = Digital VisualIoterface/
High bandwidth Digital ContentProtection
2 EIA/CEA 861 compliance coversthe
transmissionof uocompresseddigital
video with high bandwidth &gital content
protect/on, whichis being standar&zed for
future reception ofhigh definition video
signals
:_Consultyour consumer electronicsdealer
for availabil/oz
Caution:
Toensure that the DV//HDCP deviceis reset
properly, it is recommended that you follow
theseprocedures
• Whenturn/pgon your electronic
components,turn on the TV first,
and then the DVI/HDCP device
• Whentum#Tgoffyour electronic
components,turn off the DVlIHDCP
device first, and then the TL_
14
To Next Page
Loading...
