Toshiba 51H83 - Changing the On-Screen Display Language; Selecting the Antenna

Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press • or • until the SET UP menu
appears.
2. Press • or • to highlight LANGUAGE.
• I_vA
TV front panel
SET UP
ANT1/2 ANTI
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
OUICK CONNECT GUIDE
3. Press • or • to highlight your desired language.
Selecting the antenna input
You can connect to two different antenna input sources (ANT 1 or
ANT 2).
To select the antenna input using the menu system:
1. Press MENU, and then press • or • to highlight the SET UP
menu.
2. Press • or • to highlight ANT 1/2.
_SET UP i
MENU
3. Press • or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
To select the antenna input using the TV/VIDEO button:
1. Press the TV/VIDEO button on the remote control orTV (see
illustrations below). The current signal source displays in purple.
2. Continue pressing the TV/V1DEO button to select ANT l or
ANT 2.
TV front panel
SOURCE SELECTION
0 ANT 1
1 VIDEO 1
2 VIDEO 2
3 IDEO 3
4 _olorStream HD1
5 GolorStream HD2
60VI
7 ANT 2
0 7:TO SELECT
PressingTV/VIDEOonthe remote
contro/_ thecurrentsignal
source(pressTV/VIDEOagainor 0 7
i SOURCE SELECTION
ii ANT
VIDEO
IDEO 3
_olorStream HD1
ColorStream HD2
DVI
ANT 2
TV/VIDEOTO SELECT
PresslhgW/VIDEO on the TV_
zhecurrents/gna/source
TVNIDEO
Please note the following reganding
the DVl source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See "Connecting
a device to the DVI/HDCP input" on
page l_ for details.