CONNECTING YOUR TV
12
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s
remote control if you connect a REGZA-LINK compatible AV ampli er or playback device. For an
explanation of setup and operations, see pages 60 – 61.
AV amplier Playback device
Playback device
the back of your television
For the setup shown above, you will need three
HDMI cables.
NOTE:
If several devices are connected, the REGZA-LINK •
feature may not operate properly.
For proper operation, it is recommended that you •
use HDMI cables with the HDMI Logo (
).
This function is available when one PC and one •
AV ampli er are connected separately. However,
it may not operate properly if the PC is connected
via the AV ampli er.
Before controlling the device(s):
After completing the above connections, set the •
REGZA-LINK Setup menu as you desire (see page
60).
The connected devices must also be set. For •
details, see the operation manual for each device.
The REGZA-LINK feature uses CEC technology as •
regulated by the HDMI standard.
This feature is limited to models incorporating •
Toshiba’s REGZA-LINK. However, Toshiba is not
liable for those operations. Refer to individual
instruction manuals for compatibility information.
To Next Page
Loading...
