Toshiba 55VL900A - Sound Settings

CONTROLS AND FEATURES
29
Sound controls
Volume controls and sound mute
Volume
Press
2
+ or
2
– to adjust the volume.
Sound Mute
Press
once to turn the sound o and again to
cancel.
Dual
If a programme or  lm is being broadcast with a
soundtrack in more than one language, the Dual
feature allows selection between them.
a
Press MENU /
C c
to highlight Setup icon.
b
Press
B
/
C c
to highlight Sound icon and
press OK.
c
Press
B
or
b
to select Dual and press
C
or
c
to choose between Dual 1 or Dual 2.
Sound
Dual
Balance
Advanced Sound Settings
Audio Level Offset
TV Speakers
Headphone Settings
0
Dual 1
Dynamic Volume Off
Dynamic Range Control On
On
Balance
a
In the Sound menu, press
B
or
b
to select
Balance and press
C
or
c
to emphasize left
or right speaker balance.
Bass, Treble
a
In the Sound menu, press
B
or
b
to select
Advanced Sound Settings and press OK.
b
Press
B
or
b
to select Bass or Treble.
c
Press
C
or
c
to change the setting.
Voice Enhancement
Voice Enhancement emphasises the frequency
range of the speaker’s voice, making it easier to catch
what they are saying.
a
In the Advanced Sound Settings menu,
press
B
or
b
to select Voice Enhancement.
b
Press
C
or
c
to select On or O .
Audyssey ABX™
Audyssey ABX™ technology uses sophisticated
driver analysis and low frequency monitoring to
extend the range and bass of small speakers. This
enables the system to produce lower frequencies than
would be possible with a traditional system of the
same size.
a
In the Advanced Sound Settings menu,
press
B
or
b
to select Audyssey ABX.
b
Press
C
or
c
to select the desired Audyssey
ABX level (Low, High or O ).
Dynamic Volume®
Audyssey Dynamic Volume® controls volume
levels to eliminate loud spikes and raise soft dialog for
more enjoyable television and movie viewing.
a
In the Sound menu, press
B
or
b
to select
Dynamic Volume.
b
Press
C
or
c
to select On or O .
Dynamic Range Control
This feature allows control of audio compression for
some digital TV programmes (MPEG-1 and MPEG-2
audio programmes are not supported).
a
In the Sound menu, press
B
or
b
to select
Dynamic Range Control.
b
Press
C
or
c
to select On or O .