Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight FLESH TONE.
3. Press • or • to highlight ON.
@@@@@@
i
_ooE P_EFERE,OE i
COLOR
TEMPERATURE MEDIUM
DISPLAY FORMAT 10_OL
CONVERGENCE
SAVE NEW PREFERENCE
Using the CableClear TM DNR feature
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing back a video cassette or disc
damaged by repeated use.
To turn on CableClear DNR:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight CableClear DNR.
3. Press • or • to highlight AUTO.
@@@@@@
P_CTURE ANTENNA
i
DISPLAY FORMAT 1080 i
CONVEF_GENCE
SAVE NEW pREFERENCE
................................... r,
To turn off CableClear DNR:
Highlight OFF in step 3 above.
Note:
TheCaMe C/earDNR featureis not avaffab/e
al DVI mode Cwillbe segto OFF)
Selecting the color temperature
You can change tile quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
To select the color temperature:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight COLOR TEMPERATURE.
3. Press • or • to highlight the mode you prefer.
i
FLESH TONE ON il
C°NVERGENCE
SAVE NEW PREFERENCE
r
46
To Next Page
Loading...
