6-14
User's Manual
POWER AND
POWER-UP MODES
Installing the battery pack
To install a battery, follow the steps below.
CAUTIONS: 1. The battery pack is a lithium-ion battery, which can
explode if not properly replaced, used, handled or
disposed of. Dispose of the battery as required by local
ordinances or regulations. Use only batteries recom-
mended by TOSHIBA as replacements.
2. Do not touch the latch while holding the computer. Or
you may get injured by the dropped battery by
unintentional release of the latch.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack.
4. Secure the battery pack lock. Switch the battery safety lock into lock
position.(direction toward the battery)
Figure 6-2 Securing the battery pack
BATTERY PACK
BATTERY
RELEASE
LATCH
To Next Page
Loading...
