User's Manual
B-14
APPENDIX B
5. A DVD-reproduced image may not be displayed in correct position when you
press Fn+F1 to enter into Instant Security mode while a DVD is playing under
WinDVD 4.0, and then move the mouse or press the key to exit Instant
Security mode. In this case, close WinDVD 4.0 and open it again, or pres the
Stop button and then the Play button to display the DVD image in correct
position.
The following steps will work around this problem.
a. Run WinDVD 4.0. Click the Subpanel button and select the Display
option from the list.
b. In the Subpanel window, click the Setup button.
c. In the Setup window, deselect the Hardware decode acceleration
checkbox (Deselecting this checkbox will automatically deselect the
Hardware color acceleration checkbox).
d. Click the OK button (The Setup tab panel will close).
To Next Page
Loading...
