Toshiba Canvio Basics series User Manual

User’s Manual EN-3
CANVIO BASICS
Introduction
Thank you for choosing our TOSHIBA Canvio Basics Hard Drive.
Please read this User’s Manual carefully, as it contains all relevant
information for installation, usage and maintenance of the drive, as well as
security and safety advice.
In case it does not behave as expected, please refer to the “Frequently
Asked Questions” section at the end of this manual.
Check the Components
This User’s Manual is uploaded on the drive itself. We recommend to
backup the User’s Manual onto a CD or your local hard drive, directly after
the drive being installed.
Please refer to “Instruction Manual for Safety and Comfort” that is
preloaded in this External HDD.
System Requirements
■ Windows
®
10 / Windows 8.1 / Windows 8 / Windows
®
7
■ One free port of USB 3.0 or USB 2.0
Warranty Card
Canvio Basics
(including User’s Manual
and Instruction Manual for
Safety and Comfort)
USB 3.0 Micro-B Cable Quick Start Guide
and Warranty Leaflet
USB 3.0 is backward compatible with USB 2.0.
NOTE

Toshiba Canvio Basics series Specifications

General

Interface	USB 3.0
Capacity	1TB, 2TB, 4TB
Form Factor	2.5-inch
Color	Black
Transfer Rate	Up to 5 Gb/s
Rotational Speed	5400 RPM
Operating Temperature	5°C to 35°C
Non-Operating Temperature	-20°C to 65°C
Compatibility	Windows, macOS (reformatting required)
Power	USB powered (no external power required)
Dimensions	78 mm (W) x 109 mm (L) x 14 mm (H)
Weight	149 g (1TB), 217.5 g (2TB, 4TB)