EasyManua.ls Logo

Toshiba Carrier MCY-MAP0607HS-UL User Manual

Toshiba Carrier MCY-MAP0607HS-UL
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Manual 1
English
Manuel d’installation 28
Français
Manual de instalación 57
Español
AIR CONDITIONER (MULTI TYPE)
Installation Manual
For OUTDOOR USE only
Pour une UTILISATION EN
EXTÉRIEUR uniquement
Solo para USO EXTERIOR
Outdoor Unit
Model name:
Heat Pump Model
MCY-MAP0367HS-UL
MCY-MAP0487HS-UL
MCY-MAP0607HS-UL
+00_EB99809701_00Ta.book Page 1 Tuesday, December 6, 2016 2:07 PM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Toshiba Carrier MCY-MAP0607HS-UL and is the answer not in the manual?

Toshiba Carrier MCY-MAP0607HS-UL Specifications

General IconGeneral
ModelMCY-MAP0607HS-UL
CategoryHeat Pump
RefrigerantR-410A
Operating Temperature (Cooling)14 ~ 46 °C
Operating Temperature (Heating)-15°C to 24°C

Summary

1 Precautions for Safety

Safe Installation and Refrigerant Piping

Ensures safe installation practices and proper handling of refrigerant piping.

3 Installation of R410A Air Conditioner

R410A Installation Tools and Safety Cautions

Lists required tools and important safety precautions specific to R410A refrigerant installation.

6 Refrigerant Piping

Refrigerant Piping Connection Techniques

Flaring and Brazing Methods for Piping

Detailed steps for pipe flaring, burr removal, and brazing with coupling size information.

Airtight Test and Leak Detection

Step-by-Step Airtight Test Procedure

Detailed steps and requirements for conducting an airtight test on the system.

Air Purge and Refrigerant Addition

Vacuum Pump Method for Air Purge

Instructions for purging air from the system using a vacuum pump.

Refrigerant Charge Calculation and Addition

Methods for calculating and adding the correct amount of refrigerant.

8 Electric Wiring

Power Supply Requirements and Wiring

Details power supply specifications and connection requirements.

Communication Wiring Design and Specifications

Covers communication wiring layout and specifications.

Communication and Control Wiring Details

9 Address Setting

Automatic System Address Configuration

Procedure for automatically setting system addresses.

Manual System Address Configuration

Procedure for manually configuring system addresses.

Address Setting Procedures and System Examples

Automatic Address Setting for Single and Multiple Lines

Explains automatic addressing for single and multiple refrigerant lines with examples.

Manual Address Setting for Multi-Line Systems

System Address Configuration via DIP Switches

Details DIP switch settings for system addresses in multi-line configurations.

Manual Address Configuration Methods

Remote Control Address Management Operations

Checking Indoor Unit Addresses Using Remote Control

Guide to checking indoor unit addresses via the remote control.

Managing Indoor Unit Addresses with Remote Control

10 Test Run

Test Run Procedures

11 Troubleshooting

Related product manuals