Toshiba D-R2SU - Front Panel; Tray Door; Disconnect the Flexible

1-1-2. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1) and disconnect the flexible cable (2).
3. Disconnect the flexible cable (3) and two connectors (4).
4. Remove the screw (5).
5. Remove two screws (6).
6. Release four claws, then remove the front panel (7).
Fig. 2-1-2
Flexible cable (2)
Flexible
cable (3)
Tapes (1)
Connector (4)
Connector (4)
Screws (6)
Screw (5)
Front panel (7)
Claw
Claw
Claws
1-1-3. Tray Door
1. Remove the front (R) PC board and front (L) PC board. (Refer to item 1-2-4.)
2. Remove the spring (1).
3. Remove the tray door (2) while slightly bending it.
Fig. 2-1-3
Spring (1)
Tray door (2)