Toshiba D-R2SU - Fan; Rear Panel

1-1-6. Fan
1. Peel off the tape (1).
2. Disconnnect the connector (2).
3. Remove four screws (3) and the fan (4).
Note:
• After replacing the fan (4), attatch the tape (1) as it was.
1-1-7. Rear Panel
1. Remove twelve screws (1), then remove the rear panel (2).
Fig. 2-1-7
Wire (5)
Wire (5)
Screws (3)
Connector (2)
Tape (1)
Fan (4)
Acrylic board
Pass the wire (5)
underneath the
folded part.
Screws (1)
Rear panel (2)
Fig. 2-1-6