Toshiba e-STUDIO 163 - Page 142

e-STUDIO163/203 PREVENTIVE MAINTENANCE (PM) December 2005 © TOSHIBA TEC
4 - 4
C. Feed unit
D. ADF (MR-2017)
E. Bypass feed unit
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
C1 Pickup roller 90 P16-I17
C2 Drive gear
(tooth face and shaft)
W1 *c1
C3 Paper guide B
C4 GCB bushing bearing L
C5 One side of the plastic
bushing
W1
C6 Registration roller
(metal)
A R P16-I4
C7 Registration roller
(rubber)
ARP11-I18
Items to check
Cleaning
(30K)
Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
D1 Pickup roller A 90 P5-I1
D2 Separation roller A 90 P4-I10
D3 Feed roller A 90 P5-I1
D4 Registration roller A
D5 Intermediate transfer A
D6 Front read roller A
D7 Rear read roller A
D8 Exit/reverse roller A
D9 Platen sheet B or A
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
E1 Pickup roller 90 P14-I22
E2 Feed roller 90 P14-I22
E3 Separation pad 90 P13-I22
E4 Bypass tray B
E5 Drive gear
(tooth face and shaft)
W1
E6 GCB bushing bearing L
E7 One side of the plastic
bushing
W1